Mon–Sun: 6 AM–7 PM Free surface assessment Free assessment Austin, TX & St. Louis, MO (737) 283-9379
(737) 283-9379Free assessment
Concrete Contractor in The Hills, TX

Austin Local

Concrete Contractor in The Hills, TX

Pool decks, driveways, and patios resurfaced with genuine Spanish marble overlays and rubber systems.

(737) 283-9379 Get an estimate
  • Owner-ledTalk to Kyle directly
  • AustinLocal crew
  • 7 days6 AM–7 PM

Free surface assessment

Tell us what you need

  • No obligation
  • Owner-led
  • 7 days

By submitting this form you agree that we may contact you about your request and share your name and email address with partner companies for email marketing. We never share your mobile number or text message consent with third parties or affiliates for marketing or promotional purposes.

Concrete Resurfacing Serving The Hills

Surface Werx is a concrete resurfacing contractor serving The Hills, TX, transforming worn pool decks, cracked driveways, and faded patios into finished surfaces that hold up under Hill Country conditions. Kyle runs every job personally, which means the person you call is the person who shows up. If your surface needs work, call (737) 283-9379 and get a straight answer on what it'll take.

The Hills sits about 16 miles from our base, and we're out there regularly. The clay-heavy soil common to this area, including Houston Black clay, shifts seasonally and puts real stress on concrete slabs. That movement shows up as cracks, uneven sections, and surfaces that have started to degrade faster than expected. Add in the flash-flood risk that comes with living in the Hill Country and you've got outdoor surfaces that take a beating from both below and above. Pool deck resurfacing, driveway resurfacing, and patio work in The Hills aren't optional upgrades, they're maintenance the conditions demand.

What concrete resurfacing in The Hills involves

  • Surface evaluation of the existing slab before any work starts
  • Spanish marble resin-bound overlays or poured rubber systems applied over prepared concrete
  • Pool decks, driveways, patios, walkways, and garage floors
  • Cost varies by surface size, condition, chosen system, and prep required
  • Call (737) 283-9379 to book a site evaluation with Kyle
Finished concrete patio surface with aggregate detail, showing a pool area in the background.

Surface Systems

What Surface Werx installs in The Hills

Two premium systems, neither of which is ordinary stamped concrete or paint.

Spanish Marble Overlays

Genuine Spanish marble aggregate blended with high-performance resin, hand-troweled to a seamless finish. Water permeable by design. Available in over 30 colors and installed over properly prepared existing concrete. Not imitation stone, not paint.

Poured Rubber Surfacing

A resilient, slip-resistant finish built for pool decks and high-traffic outdoor areas. Comfortable underfoot in Texas heat, water permeable, and designed to flex rather than crack under the kind of seasonal soil movement The Hills sees.

Pool Deck Resurfacing

Pool decks in The Hills take UV damage, chlorine splash, and ground movement all at once. We resurface them with systems built for that combination, not patching compounds that fail in a season.

Driveway Resurfacing

Clay soil expansion and contraction in The Hills causes driveway slabs to crack and shift over time. Resurfacing stops the visible deterioration and delivers a finished look at a fraction of full replacement cost.

Local Conditions

Why Hill Country soil is hard on concrete

The Hills sits on Houston Black clay and Branyon clay loam, both high in clay content with moderate to poor drainage. Clay soil expands when wet and contracts when dry, and that cycle puts constant lateral pressure on slabs. It's one of the main reasons concrete in this area cracks and settles faster than in sandier regions. The Hill Country's limestone base underneath doesn't help either: it's rigid where the clay is flexible, and that contrast creates stress points across the slab. Resurfacing with a system like Spanish marble adds a durable bonded layer that bridges minor movement and extends the surface life significantly. For properties near a drainage path, it's worth checking whether a Floodplain Development Permit is required before any work begins, as properties in a FEMA-mapped Special Flood Hazard Area in The Hills are subject to that requirement.
Finished concrete patio with stepped terracing and decorative aggregate surface in front of a modern residential home with pool access.

How a The Hills project gets done

  • Site Evaluation

    Kyle assesses the existing surface, documents the condition, and determines what prep the slab needs before any overlay or rubber system can go down. Eligibility is based on actual site conditions, not assumptions.

  • Surface Preparation

    Proper prep is what separates a surface that holds for years from one that peels in a season. Cleaning, profiling, and addressing any structural issues happen before a single trowel of material goes on.

  • Installation and Finish

    The chosen system, Spanish marble overlay or poured rubber, is applied and hand-finished. Water permeability is built into both, which matters in a flash-flood-prone area like the Hill Country.

Serving The Hills and nearby areas

Surface Werx runs concrete resurfacing projects throughout The Hills and the surrounding communities. If you're in this part of the Hill Country and your outdoor surfaces need attention, call (737) 283-9379.

Questions about concrete work in The Hills

Not covered here? Ask Kyle directly.(737) 283-9379

Are concrete resurfacing jobs expensive in The Hills?
Cost depends on the surface type, size, condition of the existing slab, and which system is chosen. Resurfacing with a Spanish marble overlay or rubber surfacing is consistently less expensive than tearing out and pouring new concrete. Every job in The Hills is different, so contact Surface Werx for an accurate estimate.
Do I need a permit to resurface a patio or driveway in The Hills?
New structures, additions, excavation, and placement of fill material in The Hills may require permitting. If your property sits in a FEMA-mapped Special Flood Hazard Area, a Floodplain Development Permit is required before work begins. Check with the local building department before any project starts.
What is the enemy of concrete slabs in The Hills specifically?
Clay soil. Houston Black clay and Branyon clay loam are both high in clay content and expand and contract with moisture changes, putting stress on slabs year-round. Combined with Hill Country flash-flood exposure and intense UV, concrete in The Hills degrades faster than in more stable soil conditions.
Can concrete be resurfaced directly over an existing cracked slab?
Often yes, but it depends on the slab's condition. Surface Werx evaluates every existing surface before recommending a system. Minor cracking that hasn't compromised the structural integrity of the slab is frequently a candidate for overlay systems. We won't apply a finish over a slab that isn't ready for it.
What drives the cost of a driveway or pool deck resurfacing project in The Hills?
Surface size, the current condition of the slab, the system chosen (Spanish marble vs. rubber), and the amount of prep work required are the main factors. Access and finish level also play a role. Contact Surface Werx at (737) 283-9379 for an accurate estimate on your specific surface.
Does Surface Werx do commercial resurfacing in The Hills?
Yes. Commercial concrete resurfacing is part of what Surface Werx handles, including retail, hospitality, and multifamily applications. The same Spanish marble overlay and rubber systems used on residential pool decks are available for commercial surfaces.
How does hard water in The Hills affect outdoor concrete?
Water in The Hills is supplied by Hurst Creek MUD, and well water throughout the Texas Hill Country commonly measures 300 to 400+ ppm hardness. That mineral-rich water leaves deposits on pool decks and outdoor surfaces over time, compounding the weathering effect of UV and soil movement.
Can concrete be resurfaced directly over an existing cracked slab in The Hills?
Often yes, but it depends on the slab's condition. Surface Werx evaluates every existing surface before recommending a system. Minor cracking that hasn't compromised the structural integrity of the slab is frequently a candidate for overlay systems. We won't apply a finish over a slab that isn't ready for it.
How does the water supply affect outdoor surfaces in The Hills?
Water in The Hills is supplied by Hurst Creek MUD, and well water throughout the Texas Hill Country commonly measures 300 to 400+ ppm hardness. That mineral-rich water leaves deposits on pool decks and outdoor surfaces over time, compounding the weathering effect of UV and soil movement on concrete.

In the field

A look at our work

Finished concrete patio with decorative border and spa in a residential backyard setting adjacent to a modern stone and metal-roof home.
Finished concrete patio with aggregate surface surrounding an in-ground swimming pool in a residential backyard.

Ready to resurface in The Hills?

Call Kyle directly. No franchise, no middleman, no runaround.

Call (737) 283-9379 Request an estimate

Related

Next step

Tell us about the job

Your name, your number and what needs doing. A person from Surface Werx gets back to you.

Rather talk now?(737) 283-9379

  • No obligation
  • Owner-led
  • 7 days

By submitting this form you agree that we may contact you about your request and share your name and email address with partner companies for email marketing. We never share your mobile number or text message consent with third parties or affiliates for marketing or promotional purposes.